Delta PLC

Product Details:

The CPU 314 is equipped with the following:

• Microprocessor: the processor achieves a processing time of approximately 60 ns per binary instruction and 0.59 µs per floating-point operation.
• Extensive memory: 128 KB high-speed RAM (corresponds to approx. 42 K instructions) for program sections relevant to execution offers sufficient space for user programs: SIMATIC Micro Memory Cards (max. 8 MB) as load memory for the program also allow the project to be stored in the CPU (complete with symbols and comments).
• Flexible expansion capability: max. 32 modules, (4-tier installation)
• MPI multi-point interface: the integrated MPI interface can establish as many as 12 connections simultaneously to S7-300/400 or to programming devices, PCs, OPs. Of these connections, one is always reserved for programming devices and another for OPs. The MPI makes it possible to set up a simple network with a maximum of 16 CPUs via "global data communication".

Product Details:

Deltas high-performance, high-speed DVP series PLCs are the most efficient and incorporates communication capabilities. Advantages include numerous built-in convenient commands for easy operation access and communication function monitoring. The module-type unit affords tremendous space-saving, allowing simple, clip-on expansion possibilities. The PLCs high performance and extensive I/O units represent a high-value solution for machine control and industrial automation.

Common characteristics

• Adopts 32-bit CPU
• Clip-on extension modules- general (right side)
• Plug-in terminals for ease of wiring and maintenance
• Compact dimensions (H) 90 mm x (D) 60 mm DIN rail mounting
• Built-in high speed counters up to 100 - 200 kHz (model dependant)
• Program language: (IL) instruction list, (SFC) sequential function chart
• Dual communication ports RS232 and RS485 MODBUS ASCII/RTU compatible

SS2 series economic, compact ultra-slim PLC

The SS2 series slim type PLC provides basic sequential control functions with fast execution speed and enhanced real-time monitoring capability.

Key features:

• 4 sets of 10kHz pulse output
• Program capacity: 8k steps / Data register: 5k words
• 8 sets of high-speed counters (4 x 20kHz and 4 x 10kHz points)
• MPU points: 14 points (8DI + 6DO) - expandable to 494 I/O points
• Built-in RS232 and RS485 ports - supports Modbus ASCII/RTU protocol
• Supports PID auto-tuning: saves parameters automatically after PID temp. tuning complete

Additional Information:

• Delivery Time: 1 WEEK

Product Details:

The redundant CPU of the AH Series adopts a reliable redundancy structure, and integrates synchronous modules, Ethernet ports and serial communication interfaces for a more competitive control solution.

Product Details:

Slimline Programmable Logic Controllers (PLCs)

Deltas high-performance, high-speed DVP series PLCs are the most efficient and incorporates communication capabilities. Advantages include numerous built-in convenient commands for easy operation access and communication function monitoring. The module-type unit affords tremendous space-saving, allowing simple, clip-on expansion possibilities. The PLCs high performance and extensive I/O units represent a high-value solution for machine control and industrial automation.
Common characteristics

• Adopts 32-bit CPU
• Clip-on extension modules- general (right side)
• Plug-in terminals for ease of wiring and maintenance
• Compact dimensions (H) 90 mm x (D) 60 mm DIN rail mounting
• Built-in high speed counters up to 100 - 200 kHz (model dependant)
• Dual communication ports RS232 and RS485 MODBUS ASCII/RTU compatible
• Program language: (IL) instruction list, (LD) ladder diagram, (SFC) sequential function chart

Product Details:

Common characteristics:

• Adopts 32-bit CPU
• Clip-on extension modules- general (right side)
• Plug-in terminals for ease of wiring and maintenance
• Compact dimensions (H) 90 mm x (D) 60 mm DIN rail mounting
• Built-in high speed counters up to 100 - 200 kHz (model dependant)
• Dual communication ports RS232 and RS485 MODBUS ASCII/RTU compatible
• Program language: (IL) instruction list, (LD) ladder diagram, (SFC) sequential function chart

SA2 series slim type PLC offers larger program capacity and executing efficiency, offering 100 kHz high-speed output and counting functions. It is expandable with DVP-S series left-side and right-side extension modules.

Key features:

• Supports 2-axis linear and arc interpolation
• 4 sets of of high speed pulse output (2 x 100kHz / 2 x 10kHz)
• MPU points: 12 points (8DI + 4DO) expandable to 492 I/O points
• Supports DVP-S series left-side (high speed) expansion modules
• Supports standard MODBUS ASCII/RTU protocol and PLC link function
• No battery required, maintenance free (RTC operates for 15 days after power off)
• 8 sets of high speed counters (2 x 100kHz / 6 x 10kHz) 1 set of A/B phase 50kHz

Additional Information:

• Delivery Time: 1 WEEK

Product Details:

Common characteristics:

• Adopts 32-bit CPU
• Clip-on extension modules- general (right side)
• Plug-in terminals for ease of wiring and maintenance
• Compact dimensions (H) 90 mm x (D) 60 mm DIN rail mounting
• Built-in high speed counters up to 100 - 200 kHz (model dependant)
• Dual communication ports RS232 and RS485 MODBUS ASCII/RTU compatible
• Program language: (IL) instruction list, (LD) ladder diagram, (SFC) sequential function chart

SX2 series slim type PLC offers 6/14 digital points and built-in 12-bit analog I/O points. It is extendable with DVP-S series left-side and right-side extension modules.

Key features:

• Built-in mini USB
• No battery required
• Execution speed: LD: 0.35??s
• Supports 2-axis linear and arc interpolation
• Supports DVP-S series left-side (high speed) expansion modules
• Supports standard MODBUS ASCII/RTU protocol and PLC link function

Additional Information:

• Delivery Time: 1 WEEK

Product Details:

Common characteristics:

• Adopts 32-bit CPU
• Clip-on extension modules- general (right side)
• Plug-in terminals for ease of wiring and maintenance
• Compact dimensions (H) 90 mm x (D) 60 mm DIN rail mounting
• Built-in high speed counters up to 100 - 200 kHz (model dependant)
• Dual communication ports RS232 and RS485 MODBUS ASCII/RTU compatible
• Program language: (IL) instruction list, (LD) ladder diagram, (SFC) sequential function chart

SX2 series slim type PLC offers 6/14 digital points and built-in 12-bit analog I/O points. It is extendable with DVP-S series left-side and right-side extension modules.

Key features:

• Built-in mini USB
• No battery required
• Execution speed: LD: 0.35??s
• Supports 2-axis linear and arc interpolation
• High-speed counters: 2 x 100kHz and 6 x 10kHz
• High speed pulse output: 2 x 100kHz and 2 x 10kHz
• Program capacity: 16k steps 
• Data register: 10k words
• Supports DVP-S series left-side (high speed) expansion modules
• Supports standard MODBUS ASCII/RTU protocol and PLC link function

Product Details:

Common characteristics:

• Adopts 32-bit CPU
• Clip-on extension modules- general (right side)
• Plug-in terminals for ease of wiring and maintenance
• Compact dimensions (H) 90 mm x (D) 60 mm DIN rail mounting
• Built-in high speed counters up to 100 - 200 kHz (model dependant)
• Dual communication ports RS232 and RS485 MODBUS ASCII/RTU compatible

SV2 series high-end PLC providing larger program capacities and data registers for more demanding, complex applications. Increases many motion control instructions to meet high-speed applications, high-precision positioning control for labelling, packaging and printing machines.

Key features:

• Execution speed: 0.24Ã??¼s (basic instruction)
• Provides up to 16 external interrupt pointers
• Offers linear / arc interpolation motion control
• Program capacity: 30k steps / data register: 12k words
• High speed pulse outputs: 4 axes of 200kHz pulse outputs
• MPU points: 28 points (16DI + 12DO) expandable to 512 points
• Supports DVP-S series left-side (high speed) expansion modules
• Supports 2 hardware 200 kHz and 2 hardware 20 kHz high speed counters
• Auto backup function preventing loss of programs and data even if battery runs out.

Product Details:

ES2 series PLCs are compact highly efficient, functional instruments with incorporated communication capabilities, advantages such as built-in convenient commands offer easy access to operation and communication function monitoring.

Key features:

• Relay output
• Adopts 32-bit CPU
• Plug-in termination
• DIN rail mounting or chassis mount
• Built-in 3 COM ports 1x RS232 and 2 x RS485
• Program capacity: 16k steps / data register: 10k words
• Compact dimensions (H) 90 mm x (D) 60 mm DIN rail mounting
• Exclusive instructions and functional blocks designed for PV solar tracker
• New motion control instructions: Close loop control, alignment mark, shield etc.
• Built-in high speed inputs (2x 100 kHz 6x 10kHz) supports U/D, U/Ddir, A/B counting modes

Product Details:

ES2 series PLCs are compact highly efficient, functional instruments with incorporated communication capabilities, advantages such as built-in convenient commands offer easy access to operation and communication function monitoring.

Key features:

• Relay output
• Adopts 32-bit CPU
• Plug-in termination
• DIN rail mounting or chassis mount
• Built-in 3 COM ports 1x RS232 and 2 x RS485
• Program capacity: 16k steps / data register: 10k words
• Compact dimensions (H) 90 mm x (D) 60 mm DIN rail mounting
• Exclusive instructions and functional blocks designed for PV solar tracker
• New motion control instructions: Close loop control, alignment mark, shield etc.
• Built-in high speed inputs (2x 100 kHz 6x 10kHz) supports U/D, U/Ddir, A/B counting modes

Product Details:

EX2 series PLCs are compact highly efficient, functional instruments with incorporated communication capabilities, advantages such as built-in convenient commands offer easy access to operation and communication function monitoring.

Key features:

• Adopts 32-bit CPU
• Plug-in termination
• Analog Input/Output PLC
• Built-in 3 COM ports 1x RS232 and 2 x RS485
• Compact dimensions (H) 90 mm x (D) 60 mm DIN rail mounting
• Exclusive instructions and functional blocks designed for PV solar tracker
• New motion control instructions: Close loop control, alignment mark, shield etc.
• With built-in PID auto tuning function, offering a complete analog control solution
• Built-in high speed inputs (2x 100 kHz 6x 10kHz) supports U/D, U/Ddir, A/B counting modes

Additional Information:

• Delivery Time: 2-3 WEEKS

Product Details:

EX2 series PLCs are compact highly efficient, functional instruments with incorporated communication capabilities, advantages such as built-in convenient commands offer easy access to operation and communication function monitoring.

Key features:

• Adopts 32-bit CPU
• Plug-in termination
• Analog Input/Output PLC
• Built-in 3 COM ports 1x RS232 and 2 x RS485
• Program capacity: 16k steps / data register: 10k words
• Compact dimensions (H) 90 mm x (D) 60 mm DIN rail mounting
• Exclusive instructions and functional blocks designed for PV solar tracker
• New motion control instructions: Close loop control, alignment mark, shield etc.
• With built-in PID auto tuning function, offering a complete analog control solution
• Built-in high speed inputs (2x 100 kHz 6x 10kHz) supports U/D, U/Ddir, A/B counting modes

Product Details:

Extension modules simply clip onto MPUs to add many additional functions, additional digital and/or analog I/Os, communication, temperature measurement and load cell monitoring.

 

Key features:

• Analog input/output extension modules
• Simply clips onto and derives supply from main MPU
• General extension (right side) - High speed extension (left side)
• Analog Input/Output extension module

Product Details:

Extension modules simply clip onto MPUs to add many additional functions, additional digital and/or analog I/Os, communication, temperature measurement and load cell monitoring.

 

Key Features:

• Analog input/output extension modules
• Simply clips onto and derives supply from main MPU
• General extension (right side) - High speed extension (left side)
• Analog Input/Output extension module

Product Details:

Details:

• High-speed pulse output: 4 sets of 200kHz pulse output (DVP40/48/64/80EH00T3)
• Supports max. 4 hardware 200kHz high-speed counters
• Increases many motion control instructions to meet the applications that require high-speed and high-precision
• positioning control such as labeling machines, packaging machines and printing machines
• Offers linear / arc interpolation motion control
• Provides up to 16 external interrupt pointers

Product Details:

Extension modules simply clip onto MPUs to add many additional functions, additional digital and/or analog I/Os, communication, temperature measurement and load cell monitoring.

 

Key features:

• Analog input/output extension modules
• Simply clips onto and derives supply from main MPU
• General extension (right side) - High speed extension (left side)
• Analog Input/Output extension module

Product Details:

The Delta Compact Modular Mid-range PLC AS Series is a high performance multi-purpose controller designed for all kinds of automated equipment. It features Delta's self-developed 32-bit SoC CPUs for enhanced execution speed (40 k steps/ms) and supports up to 32 extension modules or up to 1,024 inputs/outputs. The AS series provides accurate positioning control for up to 8 axes via CANopen motion network and max. 6 axes via pulse control (200 kHz). It is widely used in diverse automated equipment such as electronics manufacturing, labeling, food packaging, and textile machines

Product Details:

AH Motion is the advanced motion control series with dedicated motion control CPUs and shares the same modules with AH series PLCs. Through the motion control network, such as EtherCAT, AH Motion CPU can perform high-speed, high-precision machine control with the connected servo drives on the motion network.

Product Details:

The AH500 supports excellent motion control functions including 3-axis linear interpolation, 2-axis arc interpolation, and 3-axis helical interpolation. In addition, the AH500 is capable of controlling up to 12 axes or 4 groups of 3-axis interpolation synchronously at 1ms through Delta's high speed DMCNET motion control network. The AH500 satisfies requirements for complex processing or precise motion control and is effective for applications such as building material processors, warp knitting machines and food packaging machines.

Product Details:

The new generation DVP-EH3 PLC is the high-end model of the Delta DVP-E series.


It provides larger program capacity and data registers for more demanding and complex applications.

Application:

• High-speed 3-axis servo welding machine
• High-speed cutting machine
• Bar feeder
• Distributed monitor system in production line.

Product Details:

The 2nd generation DVP-SA2 series slim type PLC offers bigger program capacity and executing efficiency, offering 100 kHz high-speed output and counting functions. It is extendable with DVP-S series left-side and right-side extension modules.

Application:

• Printing machine
• Dying machine, container filler (for prescription’s)
• Work station monitoring in production line (PLC EASY LINK)

Product Details:

Remote device monitoring, production line monitoring, building automation, printing machine, container filler (recipe application).

Product Details:

The 2nd generation DVP-SS2 series slim type PLC keeps the basic sequential control functions from the DVP-SS series PLC but with faster execution speed and enhanced real-time monitoring capability.

Application:

• Spinning machine
• Conveyer belt (rotation speed control)
• Winding machine (tension control)