Gateway Protocol Converter

Product Details:

• DIN Rail or Panel Mounted compact Protocol Converter
• Hardware with two communication ports
• COM1: RS232 / 2 or 4 wire RS485
• COM2: GSM Port
• Micro USB: download / upload / monitoring ladder, application and firmware
• Allows data monitoring / sharing for PLCs, Inverters, Controllers and other network devices using Short Message Service (SMS)
• Common model for connecting different devices.
• Several PLC and Inverters can be supported.
• Configurable for multiple Destination Number (SIM) through software
• Connects PLC / Drive on GSM Network
• CE, UL certification. RoHS compliant
• Supports GSM Quad Band frequencies 850/900/1800/1900 MHz
• Common Programming software Flexi Soft.

• Protocol converter
• Communication gateway
• Profibus gateway
• Modbus converter
• Modbus TCP/IP Converter
• Ethernet converter
• Profinet connector

Product Details:

• DIN Rail or Panel Mounted compact Single channel HART Gateway Pass Through
• PLC1 Serial port in any combination of RS232 / RS422 / 2 or 4 wire RS485 / CMOS
• Connects HART device to PLC / SCADA or any serial device. In addition allows configuration software to connect HART device.
• Allows data sharing between HART field devices and other network devices
• Allows multidropping of HART devices.
• Transformer isolation and capacitive coupling for HART devices. This simplifies loop connection which eliminates Grounding effect.
• Low power consumption
• Common Programming software for the entire Gateway family.

• Protocol converter
• Communication gateway
• Profibus gateway
• Modbus converter
• Modbus TCP/IP Converter
• Ethernet converter
• Profinet connector

Additional Information:

• Item Code: GWY-800-B

Product Details:

• DIN Rail or Panel Mounted compact Protocol Converter
• Hardware with two communication ports
• COM1: RS232 / RS422 / 2 or 4 wire RS485 / CMOS
• COM2: Profibus -DP-V0 Slave (2 wire RS485)
• Connects PLC / Drive on Profibus Network
• Allows data sharing between PLC, Inverters, Controllers and other network devices
• Common model for connecting different devices. Several PLC and Inverters can be supported
• Low power consumption of only 2.5 Watts
• Common Programming software for the entire Gateway family.

• CE with UL certification
• CProtocol converter
• Communication gateway
• Profibus gateway
• Modbus converter
• Modbus TCP/IP Converter
• Ethernet converter
• Profinet connector

Product Details:

• DIN Rail or Panel Mounted compact Protocol Converter
• Hardware with two communication ports
• COM1: RS232 / RS422 / 2 or 4 wire RS485 / CMOS and
• COM2: CAN(J1939/CANopen Slave)
• Two devices, one with serial communication port and the other with CAN communication
• Port can be connected
• Connect your Serial Device (PLCs, Drives, Controllers etc.) on CAN BUS
• Same model can be re-configured for connecting different PLCs / Devices on Serial Port
• Low power consumption of only 2.5 Watts
• Common Programming software for the entire Gateway family.

• Protocol converter
• Communication gateway
• Profibus gateway
• Modbus converter
• Modbus TCP/IP Converter
• Wthernet converter
• Profinet connector

Product Details:

• DIN Rail or Panel Mounted compact Protocol Converter
• DB9 Serial ports in any combination of RS232 / RS422 / 2 or 4 wire RS485 / CMOS
• Connects PLC to PLC or PLC to a Modbus Network (as a Master or Slave)
• Allows data sharing between PLC, Invertors, Controllers and other network devices
• Common model for connecting different devices. Several PLC and Invertors supported
• Direct connection to the Programming terminal saves additional hardware
• Low power consumption of only 2.5 Watts
• Common Programming software for the entire Gateway family.
• CE with UL certification

• Protocol converter
• Communication gateway
• Profibus gateway
• Modbus converter
• Modbus TCP/IP Converter
• Ethernet converter
• Profinet connector

Additional Information:

• Item Code: GWY-00-B

Product Details:

• Two Ethernet Switch Ports
• The HRM0800 is equipped with two Shielded Ethernet Switch ports, used to daisy chain multiple modules.
• 4-20mA Pass-Through
• The 4-20mA signals for each channel are accessible via the HE10 connector.
• Various ‘quick connect’ cables are available for easy connection to PLC analog
• Input/output modules.
• Built-in Filters and Resistor Terminations
• The HRM0800 has three sets of 8 ‘dip switches’. Each channel has one ‘dip switch’ assigned from each of the sets. The first switch is used to provide internal 250 Ohms resistor loop impedance when the PLC analog input does not provide it. 
• The second switch is used to enable the filtering of the HART information when a “smart” valve is used. The third switch is to close the current loop when the module is used without an analog I/O card.
• DC to DC Converter
• The HRM0800 has two 24 VDC power inputs; both can be supplied with one source. The first 24VDC input is used to supply HRM0800 and the second 24Vdc supply input is re-distributed to supply the ‘loop current’ for each channel. 
• The supply of each channel is isolated using a DC to DC converter. The DC to DC converter can deliver 1 Watts to the connected load.

• Protocol converter
• Communication gateway
• Profibus gateway
• Modbus converter
• Modbus TCP/IP Converter
• Ethernet converter
• Profinet connector

Additional Information:

• Item Code: HRM0800